DG008 Roll Centre Adjusting Kit

DG008 Roll Centre Adjusting Kit

Code: DG008
$246.40

ROLL CENTRE ADJUSTING KIT

Application:

  • Mitsubishi Lancer Evolution 7
  • Mitsubishi Lancer Evolution 8
  • Mitsubishi Lancer Evolution 9

Part Number: DG008

Contains:

  • Roll centre corrected Front lower control arm ball joints

Designed to rectify poor front-end geometry in lowered vehicles.

  • Bump steer corrected Front outer tie rod ends

When lowering the front suspension of modern motor vehicles the front roll centre geometry is changed away from the original manufacturers designed specifications.

This can create handling issues like reducing front end grip and an increase in bump steer reaction by repositioning suspension components away from their optimal designed position.

By just replacing the ball joint we can achieve an overall roll centre repositioning but this is only part of the correction required in the front end. With any roll centre adjustment we must also adjust the bump steer geometry to rectify changes not only  created when repositioning the roll centre but also by rectifying within reason the bump steer inherent from original manufacturing.

Drive Industries has adjusted the ball joints to correct roll centre on lowered vehicles and also adjusted the bump steer settings of our tie rod ends to suit the roll centre adjusted ball joints and to minimise the factory bump steer inherent in this model.

Note: Both ball joints and tie rods must be fitted in the one procedure to the vehicle to achieve the correct geometry designed into this kit.

A wheel alignment must be completed after the installation.


Features:

  • 12 Month / 20,000km warranty
  • New Ball Joint (where applicable)
  • Direct fit with original equipment
  • Australian designed and tested
  • Australian technical support
  • Australian owned and operated business

Questions:

Call us on 02 4314 3704 or email sales@driveindustries.com.au

Follow us on facebook https://www.facebook.com/driveindustries/

Drive Industries is a proud member of the AAAA

ROLL CENTRE ADJUSTING KIT

Application:

  • Mitsubishi Lancer Evolution 7
  • Mitsubishi Lancer Evolution 8
  • Mitsubishi Lancer Evolution 9

Part Number: DG008

Contains:

  • Roll centre corrected Front lower control arm ball joints

Designed to rectify poor front-end geometry in lowered vehicles.

  • Bump steer corrected Front outer tie rod ends

When lowering the front suspension of modern motor vehicles the front roll centre geometry is changed away from the original manufacturers designed specifications.

This can create handling issues like reducing front end grip and an increase in bump steer reaction by repositioning suspension components away from their optimal designed position.

By just replacing the ball joint we can achieve an overall roll centre repositioning but this is only part of the correction required in the front end. With any roll centre adjustment we must also adjust the bump steer geometry to rectify changes not only  created when repositioning the roll centre but also by rectifying within reason the bump steer inherent from original manufacturing.

Drive Industries has adjusted the ball joints to correct roll centre on lowered vehicles and also adjusted the bump steer settings of our tie rod ends to suit the roll centre adjusted ball joints and to minimise the factory bump steer inherent in this model.

Note: Both ball joints and tie rods must be fitted in the one procedure to the vehicle to achieve the correct geometry designed into this kit.

A wheel alignment must be completed after the installation.


Features:

  • 12 Month / 20,000km warranty
  • New Ball Joint (where applicable)
  • Direct fit with original equipment
  • Australian designed and tested
  • Australian technical support
  • Australian owned and operated business

Questions:

Call us on 02 4314 3704 or email sales@driveindustries.com.au

Follow us on facebook https://www.facebook.com/driveindustries/

Drive Industries is a proud member of the AAAA